A. Parking Space Dimensions. The minimum size of a standard parking space shall be nine feet wide and eighteen feet long. Parking spaces within enclosed garages shall have an interior dimension of at least ten feet wide and twenty feet long. All off-street automobile parking spaces are to be a minimum of nine (9) by eighteen (18) feet in size, except for compact car spaces, handicapped spaces, motorcycle spaces, and bicycle spaces (Section 9-4.115). Parking lot aisles shall be as follows: (1) Angle Parking. 02/07/2012 – The parking layout should provide continuous flow of traffic through the lot. . For parking dimensions refer to Figure 9.2.4 and. Table 2 below: . Design all spaces for large-size vehicles (about 6 feet wide and 17-18 ft long). Design some of the spaces for large vehicles and some for small vehicles (these are about 5 ft wide and 14-15 ft long). Provide a layout with intermediate dimensions (too small for large vehicles and too big for small vehicles). These dimensions are standard for most of the US. They are designed to yield a parking space that is 9’X18′ with adequate room for maneuvering in and out of . plus the overhang width. Typical Parking Layout. Accessible parking spaces: The width of accessible parking spaces shall be a minimum of eight (8) feet. 01/02/2013 – 11. Figure 4 Minimum Dimensions for Common Parking Lot Layouts . 12. Figure 5 Example of Parking Lot Angles and Dimensions . Parking Angle. Dimension. Diagram. Location 45˚ 60˚ 75˚ 90˚. Stall width, parallel to aisle. A. 12.5 10.5 9.2. 9. Stall length of line. B. 27.6 23.6 21.0 18. A parking space is a location that is designated for parking, either paved or unpaved. It can be During construction, the specific dimensions of a parking space are decided by a variety of factors. A high cost of land will encourage smaller .